Post-Processing for ArcPad 10.0 on the MobileMapper 100 / ProMark 100 / ProMark 200 platform is now available
[ information ] [ software download ]
The ‘official’ ftp folder contains 494 files, totaling 158 megabytes and will be fairly difficult to download without a reasonable FTP client. I have provided a 93-megabyte, zipped, single file download, available from a HTTP source:
[ zip compilation ]
which should be MUCH easier to download.
I have personally installed and tested the DLL on a MM100 and other than the installation destination (details below), I have had no issues.
Post-Processing for the MobileMapper 100 is an option and requires an activation key:
| 990650 | Post-Processing Option for ArcPad 10.0 on MM100 | $495 | |
There is a similar activation key for MobileMapping Field:
| 680547 | Post-Processing Option for MobileMapper Field | $495 | |
however either key will enable both products. In other words: “If you purchase Post-Processing for ArcPad, the activation key will also work for MobileMapper Field” and “If you purchase Post-Processing for MobileMapper Field, the activation key will also work for ArcPad.”
iG GPS 